iTag Boom Barrier is an automatic entrance and exit system which integrates boom barrier with RFID tag and smart cards. It is the simplest and most convenient solution to control parking access. We can generate report of each vehicle parked, its duration , frequency of arrival and exit, automatically.

Features

• By-security the barrier automatically goes back when an obstacle passes the gate.

• AC motor is more powerful and maintenance free.

• Beam can be chosen from 3m to 6m, and barrier closing time is adjusted from 1sec to 6sec.

• The barrier can be installed in right or left side.

• All the process is sound proof.

• Infrared photocell connection, Loop detector connection & IC system connection are reserved for other functions.

• Green light and red light indicates the position of the beam.

Functions

• Open the door by scanning the card

• After the door is opened the system will execute delayed stop

• After being stopped for a specific time, the system will automatically send a signal to close the door.

• The system can be configured with a card reader, allowing addition and deletion of users.

• The system supports linear or remote controlled signal transmission facilitating

iTag Boom Barrier

Technical Specifications

* Power Supply Input : 220V AC
* Power Frequency : 50/60 Hz
* Rated Power for Motor : 80W
* Rated Rotational speed for motor : 15 - 30 RPM
* Rated Torque for motor : 20 Nm
* Standard Pole Length : 3 meters
* Operation Noise : <= 50db * Pole lifting & lowering time : 0.9s to 1.8s * Temperature : -15 celsius to 60 Celsius
* Relative Humidity :
iTag Card Reader

Features:
The barrier opens up when the card is read After 17 seconds the barrier closes up
Technical Specifications
*Power Supply : 110V AC, 50/60 Hz 220V AC, 50/60 Hz
*Working Temperature : -10 C to + 75 C
*Relative humidity : 90 %
*Card reading distance : <= 10cm *Signal output : Switch signal *Rating output : 1A, 240V AC/1A, 30V DC
iTag UHF based Boom Barrier

Features:

• Secure and efficient identification.
• Hands-free and quick access control.
• Increases vehicle turn-around Gives automatic notification when a vehicle enters or leaves the facility.
• Provides full inventory history of the vehicles at the location.
  
• Tags can be identified even when the vehicle is on the move.
• Enables location of the vehicles in the facility.

Technical Specifications

* Power Supply : 110V AC, 50/60 Hz 220V AC, 50/60 Hz
* Working Temperature : -10 C to + 75 C
* Relative humidity : 90 %
* Card reading distance : <= 10cm * Signal output : Switch signal
*Rating output : 1A, 240V AC/1A, 30V DC